Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Wheel Controls of the Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Push button

This guide provides the instructions to remove and replace the steering wheel controls of the Ford Ecosport. First, get inside the vehicle and start unscrewing the fastening screws located behind the steering wheel using a Torx screwdriver; then remove the plastic cover of the steering wheel, which houses the controls and buttons, as shown in the video. At this point, disconnect the electrical connector to remove and replace the switch panel with the new one; now reassemble everything by applying the reverse procedure!

Updated on 29 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Removing the Inner Panel of the Ford Ecosport Boot
Ford Ecosport (2012-2023 / BK, MK 1) How to remove the cover panel of the rear boot of the Ford Ecosport? Follow these steps to detach the cover panel from the top of the boot. Remove th…
How to Replace the Rear Drum Brake on a Ford Ecosport
How to Replace the Rear Drum Brake on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before starting, lift the rear end of your Ford Ecosport. Begin by removing the rear wheel by unscrewing the relevant fixing bolts. Next, unscrew and…
How to Remove the Insert from the Front Door Panel of a Ford Ecosport
How to Remove the Insert from the Front Door Panel of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you can start, open the front door of your Ford Ecosport. Begin by inserting the tip of a flathead screwdriver into the gap between the insert…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos