Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on a Ford Taurus

Model: Ford Taurus MK 6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight

See other generations:
Video tutorial

This guide outlines the steps to remove and replace the front headlight on a Ford Taurus. First, open the hood of your car and start unscrewing the mounting screws located at the top of the front bumper using a socket wrench; then remove the plastic clips and the various covers.

Next, unscrew the additional screws located in the front wheel well; gently detach the bumper from the sides, thus unscrewing the screws of the front headlight. Disconnect the electrical connector of the bulbs to remove and install the new headlight assembly!


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Ford Taurus
How to Replace the Headlight Bulb on a Ford Taurus
Ford Taurus (2000-2007 / MK 4) To replace the headlight bulb on a Ford Taurus, open the hood to access the screws that secure the headlight from the top. This will allow you to rem…
How to Replace the Front Headlight of the Ford Taurus
How to Replace the Front Headlight of the Ford Taurus
Ford Taurus (2000-2007 / MK 4) This guide outlines the procedure to remove and replace the front headlight of the Ford Taurus, following the instructions below. First, open the hoo…
How to Replace the Front Headlight Bulb on a Ford Taurus
How to Replace the Front Headlight Bulb on a Ford Taurus
Ford Taurus (2010-2016 / MK 6) To replace the front headlight bulb on a Ford Taurus, open the hood to unscrew the screws securing the plastic cover at the front of the engine compa…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos