Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Light on the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Warning light – error code

To reset the engine light on the Ford Focus, the only option is to use a diagnostic tool: this must be connected to the vehicle's OBD port, located at the bottom left of the steering column. You will then need to select the car model in question and the corresponding version to ensure the light turns off; the instructions are fully detailed in the tutorial. Once the reset has occurred, you can disconnect the diagnostic tool and turn on the ignition, ensuring that the light has been reset correctly.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the Ford Focus
How to reset the TPMS light on the Ford Focus
Ford Focus (2011-2018 / MK 3) When the TPMS light related to tire pressure comes on in the Ford Focus, it means that we need to adjust the tire pressure and then reset the light. …
How to reset the service light on the Ford Focus
How to reset the service light on the Ford Focus
Ford Focus (2011-2018 / MK 3) Today we will explain how to reset the service light on Ford Kuga, Ford Mondeo, Ford Fiesta, and Ford Focus vehicles. Specifically, today we will see…
How to reset the service light on the Ford Focus model 3
How to reset the service light on the Ford Focus model 3
Ford Focus (2011-2018 / MK 3) Today we will see how to reset the service light of Ford Focus vehicles produced from 2016 to 2018. To reset the light, we need to press the accelera…

    Frequently Asked Questions

    • Focus 2004-2011 - How to find the radio code of the Ford Focus 6000 CD? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos