Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse box diagram for a Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004
Part: Fuse box

In today's useful video, we can see all the diagrams of the two fuse boxes present in a first-generation Ford Focus, a model produced from 1998 to 2004. These diagrams accurately show the position, name, and operating amperage of each individual fuse and relay within your vehicle, but now let's look at the position of the boxes. The first fuse box is located inside the vehicle's cabin, behind a small plastic door to be removed under the dashboard on the driver's side, while the second is situated in the engine compartment at the top left, near the battery.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Diagram and Location of the Fuse Boxes in the Ford Focus
Diagram and Location of the Fuse Boxes in the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today, let's discover the diagram and placement of the fuse boxes in the Ford Focus by following the instructions below. First, locate the internal f…
Fuse Box Location and Diagram for the Ford Focus
Fuse Box Location and Diagram for the Ford Focus
Ford Focus (2011-2018 / MK 3) Let’s briefly look at where to find the fuse boxes and how to obtain their diagram for the Ford Focus. First, open the bonnet and locate the external…
Fuse Diagram and Location for the Ford Focus
Fuse Diagram and Location for the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today's guide will show you the diagram and layout of the fuses for the Ford Focus. First, locate the external fuse box, situated in the engine compa…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos