Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuel Pump on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Fuel pump

To replace the fuel pump on a Ford Focus, you must completely remove the fuel tank from its housing. To do this, lift the car to access the components underneath. Remove all the fastening screws of the tank, along with the pipes and connectors related to the sensors. This will allow you to fully slide the tank out of its housing, revealing the pump at the top. You can now extract it by disconnecting the connectors and replacing it with a new one.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (1998-2004 / MK 1) In today's tutorial video, you will learn how to remove and replace the fuel pump or fuel sender unit on the first generation Ford Focus. First, acce…
Ford Focus (2011-2018 / MK 3) Briefly, here are the instructions to remove and replace the fuel pump on a Ford Focus. First, open the rear doors of the vehicle and begin removing …
Ford Focus (1998-2004 / MK 1) Today, this guide will show you the main instructions to dismantle and replace the fuel pump in the Ford Focus. To access the fuel pump or the float,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos