Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb of the Ford Kuga 2010

Model: Ford Kuga MK 1, C394 - Years: 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

See other generations:
Video tutorial

To replace the front headlamp bulb, you must remove the headlamp as there is not enough manoeuvring space; in any case, the disassembly is quite simple as the bumper does not need to be removed: the designers have adopted a really clever solution, a removable insert has been placed under the headlamp that provides access to the lower fixing pins; start by opening the front bonnet and unscrewing the two pins that secure the headlamp to the slam panel; then remove the trim applied just below the headlamp to complete its removal; at this point, remove the rubber dust cap and proceed with the bulb replacement.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of the Ford Kuga?
How to Replace the Front Headlight Bulb of the Ford Kuga?
Ford Kuga (2008-2012 / MK 1, C394) To replace the front headlight bulb of the Ford Kuga, open the bonnet to access the components at the rear of the headlight. Here, you will find the …
How to Replace the Headlight Bulb of a Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) To replace the headlight bulb of a Ford Kuga, detach the plastic cover located immediately under the corresponding headlight. Then, open the bonnet a…
Removing the Rear Headlamp Bulb on a Ford Kuga
Removing the Rear Headlamp Bulb on a Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) In this video tutorial, you will learn how to remove the rear headlamp bulb from a Ford Kuga in simple steps without any tools. First, open the boot …

    Frequently Asked Questions

    • Kuga 2012-2019 - How to replace the sidelight bulbs in Ford Kuga? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos