Do it yourself
Frequently asked questions about cars and motorcycles

How to Enter the Radio Code on a Ford Fusion?

Model: Ford Fusion MK 1 - Years 2002-2012
Part: Warning light – error code

The author of this video shows the correct way to enter the radio code on a Ford Fusion. As we can see, the YouTuber uses the buttons on the radio, numbered from 1 to 5 (button 6 is not needed for this procedure). The first button is used to enter the first digit of the radio code and must be pressed as many times as the value of the digit to be entered. The second button is for the second digit of the code, and so on up to the fourth. The fifth button does not add any digit to the code but instead confirms the entered code.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Fusion (2002-2012 / MK 1) To replace the radio in a Ford Fusion, use a tool to pry off the trim that completely surrounds the device. Once removed, unscrew the four screws und…
Ford Fusion (2002-2012 / MK 1) In this tutorial, you will see the diagram related to the fuses present in a Ford Fusion car. The first fuse box is located inside the vehicle's cabi…
Ford Fusion (2002-2012 / MK 1) This video shows the correct location of the fuse boxes in the Ford Fusion. It also shows their assignment and rating, to identify the correct fuse a…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos