Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Coolant Replacement

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Antifreeze coolant

See other generations:
Video tutorial

Replace the engine coolant when it appears very dark; this colour indicates the presence of rust in the system, often caused by filling it with plain water. Open the cap of the coolant reservoir, locate the drain valve at the bottom of the radiator, and remove it to allow the system to empty.

Once all the fluid has drained, refit the valve and fill the system with the appropriate coolant. Start the engine and activate the cabin heating, waiting for the operating temperature to be reached until the cooling fan engages, then check the level in the reservoir.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Removal and Replacement of Thermostat
Ford Focus (2004-2011 / MK 2, Focus 2) This video shows how to remove and replace the thermostat on your car. First, disconnect the negative terminal of the battery; then raise the car wit…
Removal and Replacement of Thermostat
Removal and Replacement of Thermostat
Ford Focus (2004-2011 / MK 2, Focus 2) This video shows how to remove and replace the water thermostat in your car. First, locate where it is situated and proceed to remove it; disconnect …
Where is the coolant temperature sensor located in the Ford Focus?
Where is the coolant temperature sensor located in the Ford Focus?
Ford Focus (2011-2018 / MK 3) This video shows where the coolant temperature sensor is located in the Ford Focus and how to proceed if you need to replace it. As shown, the sensor…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos