Do it yourself
| ||||
|
Ford Ka - Video tutorial
Model: Ford Ka
MK 2
- Years 2008-2016 To disassemble the right front door panel of the Ford Ka, we start by removing the outer part of the door handle with a plastic tool used for closing the door. By removing this piece, we find three screws that we will unscrew. Then, we remove a cap in the handle used for opening the door, which hides a screw that we also remove. Next, using the same plastic tool, we pry from the bottom to remove the plastic behind the side mirror and then pry downwards to remove it. Once the plastic behind the mirror is removed, we can use the same plastic tool to detach the door panel from the bottom and then continue with our hands. Once it is detached on the sides, we lift it to detach it completely, and finally, we unclip the cord that holds the door handle. To reassemble the door panel, we follow the same procedure in reverse.
Posted on 2 October 2023 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |