Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Handbrake Cover of the Ford Focus?

Model: Ford Focus MK 4 - Years 2018-2025
Part: Parking brake

To replace the handbrake cover, simply grip the old cover that wraps around the handbrake lever, pulling it outward. This will completely remove the old cover, allowing you to insert the new cover around the handbrake lever. After inserting the new cover, secure it to the lever by pushing it fully down. Once installed, ensure it is properly secured and allows the handbrake to complete its travel.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2004-2011 / MK 2, Focus 2) Do you want to remove the cover of the handbrake lever on a Ford Focus to adjust the tension? This guide shows you how to proceed: using a plastic sp…
Ford Focus (2011-2018 / MK 3) In this article, with the support of the video tutorial below, we will see how to adjust the handbrake of the Ford Focus 3rd series. The procedure re…
Ford Focus (2004-2011 / MK 2, Focus 2) In this brief guide, you will learn the main instructions to adjust the handbrake lever on a Ford Focus. First, get inside the vehicle and remove the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos