Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Car door

This guide outlines the necessary instructions to remove and replace the rear door on a Ford Fiesta. First, open the front door and start disconnecting the rubber cover near the hinge of the rear door; then disconnect the electrical connector as shown in the video. At this point, use a socket spanner with an extension to unscrew the hinge bolts, then remove the entire rear door; finally, refit the new door by reversing the disassembly procedure!

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Door of the Ford Fiesta
Removing the Rear Door of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this brief and simple guide, you will see the steps that will allow you to remove and replace the rear door of the Ford Fiesta. First, open the re…
How to Remove the Rear Door Panel on a Ford Fiesta?
How to Remove the Rear Door Panel on a Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) As shown in this tutorial, removing the rear door panel on a Ford Fiesta is a simple and quick task. Start by opening the door in question, then remo…
How to Dismantle the Rear Door Lock on a Ford Fiesta MK7
How to Dismantle the Rear Door Lock on a Ford Fiesta MK7
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video tutorial, you will learn how to dismantle the rear door lock module on the seventh generation Ford Fiesta, following the instructions b…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos