Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Manually Set the Time on a Ford F-150

Model: Ford F-150 MK 12 - Years 2009-2014
Part: Clock

The procedure to manually change the system time displayed on your Ford F-150 (2009-2014) is very simple, and with the following guide, you will complete it in just a few seconds. First, get inside the vehicle and turn on the instrument cluster. Next, with the radio off, locate and press the "Menu" button on the right side. At this point, use the up and down arrow buttons to adjust the hours. Then press "Menu" again and do the same for the minutes. Finally, press the "Menu" button one last time to save the changes.

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Time on the Ford F-150
How to Change the Time on the Ford F-150
Ford F-150 (2021-2026 / MK 14) If you own a 2026 Ford F-150, this guide will help you quickly and effectively change the displayed time manually. First, enter the vehicle and start…
How to Set the Time in a Ford F-150 Pickup?
How to Set the Time in a Ford F-150 Pickup?
Ford F-150 (2015-2020 / MK 13) In this tutorial, see how to set the time in a Ford F-150 pickup, a very simple and quick operation, for example, after disconnecting the battery or …
How to change the time on the Ford F-150
How to change the time on the Ford F-150
Ford F-150 (2015-2020 / MK 13) To manually change the displayed time on your Ford F 150, simply follow the procedure described in this new guide directed to you. First, reach the d…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos