Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door of the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Car door

In this brief and simple guide, you will see the steps that will allow you to remove and replace the rear door of the Ford Fiesta. First, open the rear door and start by disconnecting the small rubber sleeve located near the door hinge; then disconnect the electrical connector of the wiring, as shown in the video. At this point, unscrew the hinge fixing screws using a Torx screwdriver and a socket wrench; detach and remove the door, applying the reverse procedure for reassembly!

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel of a Ford Fiesta
How to Remove the Rear Door Panel of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you can start, open the rear door of your Ford Fiesta. Begin by unclipping and removing the window winder by simply releasing the internal fix…
How to Remove the Front Door Panel of a Ford Fiesta
How to Remove the Front Door Panel of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you begin, open the front door of your Ford Fiesta. Using a thin but sturdy tool, start by prying, pulling out, and removing the door panel in…
How to Replace the Tailgate Release Button on the Ford Fiesta
How to Replace the Tailgate Release Button on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this guide, you will find instructions to remove and replace the tailgate release button of the Ford Fiesta's boot. First, move to the rear of the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos