Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Which Fuse is for the Wipers on a Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Windshield wipers

If the wipers on your Ford Fiesta have suddenly stopped working, the first thing to do is check the status of the relevant fuse, the location of which is indicated in this video. As shown, the fuse in question is located in the fuse box inside the cabin, specifically behind the passenger glove compartment. It is labelled F11 and is 20A. If faulty, ensure you use a replacement of the same amperage and operate with the vehicle off; otherwise, you could damage the wiper motor or injure yourself.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the number plate light fuse in the Ford Fiesta?
What is the number plate light fuse in the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) If the number plate light on your Ford Fiesta has suddenly stopped working and the bulbs are intact, check the status of the corresponding fuse, as i…
What is the fuse and relay for the radiator fan in the Ford Fiesta?
What is the fuse and relay for the radiator fan in the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) If the radiator fan in your Ford Fiesta has suddenly stopped working, first check the status of both the respective fuse and relay, as shown in this …
How to Remove the Windscreen Wiper Motor on a Ford Fiesta 6
How to Remove the Windscreen Wiper Motor on a Ford Fiesta 6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, see how to remove and replace the windscreen wiper motor on a sixth generation Ford Fiesta by following these simple and quick steps. …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos