Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on the Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Headlight bulb

See other generations:
Video tutorial

If one of the bulbs inside the front headlamps of your Ford Ecosport has stopped working and you want to learn how to replace it, read this guide carefully and put the instructions into practice. First, switch off the car and lift the bonnet.

Then, remove the protective cap located at the rear of the headlamp and subsequently remove the bulb holder. At this point, take out the faulty bulb and replace it with a new compatible one. Finally, refit all the components correctly, and you are done.


Updated on 1 September 2026 by ScegliAuto


Related tutorials

Replacing the Front Fog Light on the Ford Ecosport
Replacing the Front Fog Light on the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) In this guide, we will go through the main steps to remove and replace the front fog light and its bulb on the Ford Ecosport. First, move to the fron…
How to replace the front headlight bulb of the Ford Ecosport
How to replace the front headlight bulb of the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) In this new guide of ours, we will discover the various steps that you need to apply if you want to correctly complete the replacement of the front h…
Replacing the Front Fog Light Bulb on the Ford Ecosport
Replacing the Front Fog Light Bulb on the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Today's instructions will show you how to dismantle and replace the front fog light bulb on the Ford Ecosport. First, move to the front of the vehicl…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos