Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Where is the windshield wiper fuse located in the Ford Focus?

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Windscreen wipers
Operation: Where is the windshield wiper fuse located in the Ford Focus?

If the windshield wipers of our Ford Focus have suddenly stopped working, we can first check the status of the corresponding fuse, the location of which is indicated in this video. As shown, the fuse in question is located in the box inside the engine compartment, under the black plastic cover near the battery. It is labeled with the code F18 and is the first one in the lower block when looking at the box from the front. If it is faulty, make sure to replace it with an equivalent specification and perform the operation with the vehicle turned off.


Posted on 12 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2004-2011 - Where is the Ford Focus windshield washer pump fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos