Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Where is the fuel pump fuse located in the Ford Focus?

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Fuel pump
Operation: Where is the fuel pump fuse located in the Ford Focus?

In this video, we can see where the fuel pump fuse is located in the Ford Focus, which should be checked if it suddenly stops working. As shown, it is located in the box inside the passenger compartment, just behind the glove compartment on the passenger side, which needs to be removed. The specific fuse is the top left one in the box and has a 20A rating. If it is faulty, make sure to replace it with a replacement of the same specifications and always work with the vehicle turned off to avoid any damage.


Posted on 21 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - How much does it cost to overhaul the Ford Focus diesel pump? Read Answer
    • Focus 2011-2018 - How much does it cost to replace the fuel pump on the Ford Focus 1.8 TDCi? Read Answer
    • Focus 2011-2018 - Where is the fuel pump of the Ford Focus 1.6 Tdci? Read Answer
    • Focus 2011-2018 - Where is the diesel pump located in the Ford Focus estate? Read Answer
    • Focus 2011-2018 - Where is the inertia switch on the Ford Focus 1.6? Read Answer
    • Focus 1998-2004 - Where is the 2000 Ford Focus fuel pump located? Read Answer
    • Focus 2011-2018 - Where is the fuel pump located in a diesel Ford Focus 1.8? Read Answer
    • Focus 2004-2011 - Where is the Ford Focus fuel pump located? Read Answer
    • Focus 2004-2011 - Where is the fuel float of the Ford Focus? Read Answer
    • Focus 2004-2011 - How much does the Ford Focus float cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos