Do it yourself
| ||||
|
Ford Fiesta - Video tutorial
Model: Ford Fiesta
MK VI, Fiesta 6, MK 6
- Years 2008-2017 Of the main safety accessories, the airbag is one of the fundamental ones and at the same time it can be subject to use or replacement. Replacing the airbag is not that difficult and doing it yourself can bring significant savings. First of all take care of getting the tools and screwdrivers for disassembly, also buy the spare parts already and get to work. The first technical step will be the disassembly of the steering box. Once the steering wheel has been removed, go to the bonnet to disconnect the cables that could create problems and impediments. In particular, go near the engine and disconnect the negative pole of the battery. Then take the steering box back and turn it with the inside towards you. In this way you will have a clear view of the two pins that hold the airbag fixed inside and on which you will then have to work. To do this, take a fixed screwdriver of the most suitable size by pivoting on the metal hooks inside the two holes. This way, all you have to do is remove the old airbag
Posted on 17 September 2023 by ScegliAuto
How to replace the 2010 Ford Fiesta airbag
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) To disassemble and replace the old Ford Fiesta Airbag independently; first we must disconnect the battery terminals, to avoid the possibility of a sh
How to remove airbags on Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) We see the disassembly of the steering wheel airbag on a Ford Fiesta. We disconnect the cover plastics around the steering wheel (rear). Once the pla
Disassembly of the Ford Fiesta steering wheel airbag
Ford Fiesta (1996-2002 / Fiesta 4, MK IV, Be91, MK 4) In this short and simple guide, we will see the instructions that will allow us to disassemble and remove the steering wheel airbag of the Ford Fiest Other guides that may interest you
|
Frequently Asked QuestionsFiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.064
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |