Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Ford EcoSport?

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

Replacing the remote battery of the Ford EcoSport, as shown in this tutorial, is an extremely simple and quick operation. You will need a replacement battery of type CR2032 and a small flat-head screwdriver.

First, press the indicated button located on the side edge, then separate the rear cover using the screwdriver. Next, remove the emergency key, lever in the indicated slot, and separate the two halves of the remote.

At this point, you can remove the old battery, position the replacement, and reassemble everything.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery for the Ford Ecosport
How to Replace the Key Fob Battery for the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) The following instructions will show you how to disassemble and replace the battery in the key fob for the Ford Ecosport. First, take your key fob an…
How to replace the battery of the Ford Ecosport remote control
How to replace the battery of the Ford Ecosport remote control
Ford Ecosport (2012-2023 / BK, MK 1) The necessary procedure to correctly replace the battery inside the remote control of your Ford Ecosport is really very simple. Everything you need t…
Replacing Key Fob Battery on Ford Ecosport
Replacing Key Fob Battery on Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Today, see how to disassemble and replace the battery of the key fob for a Ford Ecosport by following these simple steps. First, take the key fob in …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos