Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Key Fob Battery on Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Key

Today, see how to disassemble and replace the battery of the key fob for a Ford Ecosport by following these simple steps. First, take the key fob in hand and remove the key inside it; then, using the key itself, pry open the sides of the fob to open the back cover, as shown in the video. At this point, remove the battery from the fob and replace it with a new one of the correct type (in this case, a CR 2450 3V); then insert it the right way round and reassemble the key fob cover!

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the key battery for the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) One of the causes of a malfunctioning vehicle key is a flat remote battery. Replacing the battery in a Ford Ecosport remote is a very simple and quic…
How to Replace the Remote Battery in a Ford Ecosport?
How to Replace the Remote Battery in a Ford Ecosport?
Ford Ecosport (2012-2023 / BK, MK 1) To replace the remote battery in a Ford Ecosport, press the button located at the top of the device to detach the chrome cover to which the key is at…
How to replace the battery of the Ford Ecosport car remote control
How to replace the battery of the Ford Ecosport car remote control
Ford Ecosport (2012-2023 / BK, MK 1) To replace the battery of the Ford Ecosport car remote, we need to lift the metal key and insert a flat-head screwdriver along the side perimeter of …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos