Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Bulb of the Ford Mondeo

Model: Ford Mondeo / Fusion MK 2 - Years 2000-2007
Part: Headlight bulb

Lift the bonnet and rotate the clips next to each headlight to extract them and remove the front panel of your car. Next to the headlight and above it, there are steel pins that you can lift to free the headlights.
Gently pull the headlights towards you and disconnect the various connectors present to work more comfortably and protect the various bulbs.
Now, to extract the light, rotate its cover and grasp the bulb holder with pliers. Once pulled out, you can directly replace the bulb. Try not to touch the bulb directly with your hands to avoid shortening its lifespan. Reassemble everything by retracing the steps.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Ford Mondeo 5
How to replace the front headlight bulb of the Ford Mondeo 5
Ford Mondeo / Fusion (2022-2026 / MK 5) In the following guide, we will explain step by step how to correctly replace the headlight bulb of your Ford Mondeo Mk5. First, make sure you have p…
How to Replace the Headlamp Bulb on the Ford Mondeo
How to Replace the Headlamp Bulb on the Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) In today's video, we will see how to replace the headlamp bulb on the Ford Mondeo. First, it is recommended to proceed with the engine cold to avoid …
How to Replace the Fog Light Bulb on a Ford Mondeo
How to Replace the Fog Light Bulb on a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) In this video, we will see how to replace the fog light bulb on a Ford Mondeo. Start by removing the plastic grille frame around the side fog light l…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos