Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brakes on a Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Brake drums and shoes

See other generations:
Video tutorial

In this tutorial, see how to replace the rear brakes on a Ford Fiesta, a simple operation that requires good manual skills. First, lift the side you will be working on, then remove the wheel and, using a T30 Torx key, unscrew the two bolts securing the drum.

Next, disconnect the retaining clips of the brake shoes, remove them along with the various springs, and clean any dirt present. At this point, position the new parts and reassemble everything by following the reverse procedure.


Updated on 15 September 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brakes on the Ford Fiesta VI
How to Replace the Rear Brakes on the Ford Fiesta VI
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Here’s how to replace the drum brakes on the rear of the Ford Fiesta MK6: ensure the handbrake is engaged, open the bonnet, and remove the brake flui…
How to Replace the Rear Brake Shoes on a Ford Fiesta?
How to Replace the Rear Brake Shoes on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) To replace the rear brake shoes on a Ford Fiesta, lift the car using a jack or ramp, so that the corresponding wheel is not in contact with the groun…
How to Adjust the Handbrake Cable on the Ford Fiesta
How to Adjust the Handbrake Cable on the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) These brief and simple steps will show you how to adjust the handbrake on the Ford Fiesta. First, get into the vehicle and start by removing the plas…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos