Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to change the headlight bulbs of the Ford Fiesta

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Headlight bulb
Operation: How to change the headlight bulbs of the Ford Fiesta

To replace the headlight bulbs of this car model, you must proceed with the removal of the headlight itself since there is not enough room for maneuver in the engine compartment; therefore put the vehicle in safety by turning off the ignition and pulling the brake; therefore open the front hood and unscrew the fixing screws of the headlight away from its seat just enough to disconnect the power socket; once the spotlight has been placed on a work surface, taking care not to scratch it, remove the caps, disconnect the power socket of the bulb and extract it from its seat to be able to replace it. We will proceed backwards for its installation.


Posted on 19 September 2023 by ScegliAuto



How to change the bulbs on the Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) How to change the bulbs of the Ford Fiesta? Let's see the disassembly of the bulbs and the headlight. We lift the front hood of the car, unscrew the
How to replace headlight bulbs on Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Did a light bulb in your car go out? Let's see how to replace the headlight bulbs on Ford Fiesta: open the front hood by pulling the lever located at
How do i replace the rear light bulbs of the Ford Fiesta?
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In order to replace the rear light bulbs of the Ford Fiesta you have to lift the tailgate and go to remove the screws located next to the gasket, imm

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos