Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Window Regulator Switch Replacement

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Accessory kit

See other generations:
Video tutorial

Open the relevant door and remove the cap located behind the handle. This will allow you to unscrew and remove the bolt that secures the door panel.

Using a lever tool, remove the entire panel around the handle. Disconnect all the plugs present, allowing you to work more comfortably on the panel with the window switch.

Finally, reinstall the new switch buttons and retrace the steps described above in reverse for reassembly.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Replacing Window Switches on Ford Focus
Replacing Window Switches on Ford Focus
Ford Focus (2011-2018 / MK 3) Replace the window switch panel if damaged. Here’s how to remove it. Use a lever to detach the plastic covering of the handle. With a plastic or meta…
Replacing Front Speakers on Ford Focus
Replacing Front Speakers on Ford Focus
Ford Focus (2011-2018 / MK 3) In this guide, you will learn how to remove the front speakers from a third-generation Ford Focus. First, open the front door and remove the door pan…
How to Recalibrate the Window Regulator Motor on a Ford Focus
How to Recalibrate the Window Regulator Motor on a Ford Focus
Ford Focus (2018-2025 / MK 4) This guide provides instructions on how to reset and recalibrate the window regulator motors on a Ford Focus. First, get inside the vehicle and turn …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos