Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the Ford Focus diesel filter

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Diesel filter
Operation: How to replace the Ford Focus diesel filter

First you will need to locate the filter in question, it is located in the lower part of your car more or less at the height of the rear passenger seats, and equip yourself with safety systems, since you will work with material highly flammable, or with an oil pan to avoid getting dirty on the ground. Once identified you will have to go and remove the ties that block the inlet and outlet pipes, and once this is done you can go and disconnect the pipes, you just have to unscrew the bolts that block the filter to the car body and replace the filters , retrace the steps in reverse for reassembly.


Posted on 22 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2004-2011 - How much does it cost to replace the diesel filter on the Ford Focus 1.6 tdci? Read Answer
    • Focus 2004-2011 - How often should the Ford Focus diesel filter be changed? Read Answer
    • Focus 2004-2011 - How much does the Ford Focus fuel filter cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos