Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Handbrake adjustment on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Parking brake

In the video tutorial of this guide, we are shown in a few simple steps how to adjust the handbrake cable on a Ford Focus, second series model produced from 2004 to 2011. Therefore, the operation is very simple to do, first we need to remove the plastic from the central tunnel around the handbrake lever and then also remove its cover. Once this is done, we will immediately see the adjustment nut that manages the tension of the handbrake cable, so, to adjust it, we just need to tighten or loosen the tension of the nut with a 13mm wrench.

Posted on 8 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Handbrake Cable on the Ford Focus MK2
How to Adjust the Handbrake Cable on the Ford Focus MK2
Ford Focus (2004-2011 / MK 2, Focus 2) In today's tutorial video, learn how to adjust the handbrake cable on the second generation Ford Focus in simple and quick steps. First, get inside t…
How to adjust the handbrake lever on the Ford Focus
How to adjust the handbrake lever on the Ford Focus
Ford Focus (1998-2004 / MK 1) To adjust the travel of the handbrake lever on a Ford Focus, start by releasing the handbrake; stay inside the cabin, remove the lever gaiter by dise…
How to adjust the handbrake lever of the Ford Focus
How to adjust the handbrake lever of the Ford Focus
Ford Focus (2011-2018 / MK 3) Below we will see the main instructions that will allow us to adjust the handbrake lever of the Ford Focus. First of all, we get on board the car and…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos