Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the tire pressure light on the Ford C-Max?

Model: Ford C Max MK 2 - Years 2010-2019
Part: Tire pressure warning light

In order to reset the tire pressure warning light of the Ford C-Max, you need to inflate the car's tires to the recommended pressure value: this value is written on the sticker that is attached to the driver's side door pillar. Once the tires have been inflated, you can go inside the car and turn on the instrument panel: this way the sensors will activate to read the new tire pressure values. If the light remains on, you can drive for a few kilometers to permanently turn off the light.

Posted on 11 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Ford C Max (2010-2019 / MK 2) After checking the tyre pressure and replacing any worn tyres, follow the instructions shown in the video to reset the tyre pressure warning light. A…
Ford C Max (2010-2019 / MK 2) Follow these step-by-step instructions to reset the tyre pressure warning light on the Ford C-Max; before performing the reset, ensure all four tyres…
Ford C Max (2010-2019 / MK 2) It will be possible to completely reset the tire pressure warning light on the Ford C-Max by inflating the tires to the recommended pressure value: t…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos