Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear shift boot and knob of the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Shifter boot

These short and simple steps will show us how to disassemble and replace the gear shift knob and boot of the Ford Fiesta. First of all, we get into the car and start by removing the plastic cover located at the base of the gear shift lever, prying on the sides; then we separate the knob and the boot of the gear shift, replacing the components with new original ones if necessary, as shown in the video. At this point, we assemble the components and reassemble everything on the gear shift lever, properly fixing the knob and finally the plastic cover at the base of the gear shift lever!

Posted on 16 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the gear knob of the Ford Fiesta
How to replace the gear knob of the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Today's instructions will illustrate the process of disassembling and replacing the gear knob of the Ford Fiesta manual transmission, in simple steps…
Replacement of the gear knob of a Ford Fiesta
Replacement of the gear knob of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video we can see how to change the gear knob and gear shift boot on a Ford Fiesta MK6: first of all, we need to remove the boot from its hous…
Removing the Gear Gaiter on Fiesta
Removing the Gear Gaiter on Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Want to replace the gear gaiter on a Fiesta? Here's how to remove the knob with the gaiter. Detach the gaiter frame from the plastic covering on the …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos