Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear knob of the Ford Fiesta

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Shift knob

Today's instructions will illustrate the process of disassembling and replacing the gear knob of the Ford Fiesta manual transmission, in simple steps. First, we get on board the vehicle and start gently detaching the gear shift boot from the base, levering on the sides; then we unscrew the knob counterclockwise, until it is removed from the lever (along with the boot), as shown in the video. At this point, we separate the gear shift boot from the knob, replacing the latter with the new one; we reassemble the boot and the knob on the lever, fixing them properly!

Posted on 2 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Gear Knob from a Ford Fiesta
How to Remove the Gear Knob from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before starting, sit in the driver's seat of your Ford Fiesta. Begin by gripping the gear knob with both hands. Next, unscrew it from the gear lever.…
How to Replace the Gear Knob on a Ford Fiesta
How to Replace the Gear Knob on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the gear knob on a Ford Fiesta, start by lowering the gear gaiter by pulling it down. Now take the gear knob and unscrew it by turning it …
How to Replace the Gear Knob on a Ford Fiesta?
How to Replace the Gear Knob on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the gear knob on a Ford Fiesta, grip the old knob while keeping the leather cover underneath secure. This will allow you to rotate the old…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos