Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How do I replace the Ford Fiesta gear knob?

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Gear Shift Knob
Operation: How do I replace the Ford Fiesta gear knob?

In order to replace the Ford Fiesta gear knob you have to go and grab the old knob, keeping the leather upholstery firmly underneath. In this way it will be possible to turn the old knob counterclockwise, so that it can be detached from the leather boot and removed from the upper part of the gear lever. At this point it will be possible to insert the new gear knob, screwing it clockwise and making sure that it is fixed on the end of the lever: therefore it will be possible to verify that it is possible to engage the gears without problems.


Posted on 11 October 2022 by ScegliAuto



How to replace the Ford Fiesta gear knob
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) To replace the gear knob on your Ford Fiesta, start by lowering the gear gaiter by simply pulling it downwards, now take the gear knob and unscrew it
How to remove the gear knob on a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Before we begin, we will have to sit in the driver's seat of our Ford Fiesta. So let's start by going to grab the gear knob with both hands. Next, we
How do you replace the gear knob of the Ford Fiesta?
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) The replacement of the gear knob of the Ford Fiesta is done by grabbing the old knob, so that it can be rotated counterclockwise: by rotating the kno

    Frequently Asked Questions

    • Fiesta 2008-2017 - How much does it cost to replace the Ford Fiesta 6 gear knob? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos