Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Factory Radio from a Ford F-150

Model: Ford F-150 MK 12 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

See other generations:
Video tutorial

These brief and simple instructions will show you how to remove and replace the factory radio from a Ford F-150. First, get inside the vehicle and start unscrewing the mounting screws found at the top; remove the side plastic covers along with the air vents, and take off the entire center panel (disconnecting all the electrical connectors at the back), as shown in the video.

At this point, remove the factory radio and replace it with the new one compatible with your vehicle, following the video tutorial to the end!


Updated on 13 October 2026 by ScegliAuto


Related tutorials

How to remove the factory radio of the Ford F 150
How to remove the factory radio of the Ford F 150
Ford F-150 (1997-2004 / MK 10) In this new guide of ours, we will describe all the steps you need to follow if you want to disassemble the factory radio in your Ford F 150 on your …
How to Remove the Factory Radio from a Ford F-150
How to Remove the Factory Radio from a Ford F-150
Ford F-150 (1997-2004 / MK 10) Today, you will learn how to disassemble and replace the factory radio in a Ford F-150 by following these simple steps. First, open the hood and disc…
How to Reset the Ford F-150 Radio?
How to Reset the Ford F-150 Radio?
Ford F-150 (2015-2020 / MK 13) To reset the Ford F-150 radio, turn the ignition key to the 'On' position. Once the dashboard lights up, press and hold the radio buttons to power it…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos