Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Ford F-150 Radio?

Model: Ford F-150 MK 13 - Years: 2015, 2016, 2017, 2018, 2019, 2020
Part: Warning light – error code

See other generations:
Video tutorial

To reset the Ford F-150 radio, turn the ignition key to the 'On' position. Once the dashboard lights up, press and hold the radio buttons to power it on and skip to the next track simultaneously.

Keep the buttons pressed until the screen resets and the manufacturer's logo reappears. When the logo shows up again, it means the radio has been successfully reset and all settings have been restored to their defaults.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

Ford F-150 (2004-2008 / MK 11) To replace the radio in a Ford F-150, pry up the lower part of the climate control panel. This will allow you to detach the control panel that also s…
Ford F-150 (2015-2020 / MK 13) To reset the Service light on a Ford F-150, turn on the ignition by turning the key. Then, use the controls on the left steering wheel to navigate to…
Ford F-150 (2009-2014 / MK 12) To reset the oil light on a Ford F-150, turn the key to the ON position without starting the engine, just to power on the instrument cluster, and pre…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos