Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the door panel of the 2013 Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Door trim panel

Today we illustrate the steps to replace the door panel of the 2013 Ford Ecosport. To remove the door panel, we need to open the door that needs to be replaced and remove the triangular base near the glass, in the case of the front door the triangle will be on the outside. We also unhook the cover of the closing handle and the opening handle to access the screws to be unscrewed. Using a plastic lever, we then proceed to disassemble the panel by unhooking the sides and the window lifter connector. To mount the panel once finished with the desired maintenance, we will need to follow the steps in reverse.

Posted on 28 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Insert from the Front Door Panel of a Ford Ecosport
How to Remove the Insert from the Front Door Panel of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you can start, open the front door of your Ford Ecosport. Begin by inserting the tip of a flathead screwdriver into the gap between the insert…
Removing the Inner Panel of the Ford Ecosport Boot
Ford Ecosport (2012-2023 / BK, MK 1) How to remove the cover panel of the rear boot of the Ford Ecosport? Follow these steps to detach the cover panel from the top of the boot. Remove th…
How to Remove the Door Panel on a Ford Ecosport
How to Remove the Door Panel on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Learn how to remove the door panel on a Ford Ecosport: disconnect the battery terminals located in the engine bay, and use a screwdriver to unscrew t…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos