Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassemble the Right Front Door Panel of a Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Door trim panel

See other generations:
Video tutorial

Disassemble the right front door panel of a Ford Ecosport: disconnect the battery terminals located in the engine bay, use a screwdriver to unscrew and remove the rubber plugs and plastics under the internal handle, then unscrew the fastening screws located in the same area and disconnect the fastening clips (using a lever).

Finally, pull the panel away with your hands; detach it from the door (disconnect the power wiring and the door opening cable).

Carry out the desired maintenance inside the door and reassemble the panel.


Updated on 4 March 2026 by ScegliAuto


Related tutorials

How to Remove the Insert from the Front Door Panel of a Ford Ecosport
How to Remove the Insert from the Front Door Panel of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you can start, open the front door of your Ford Ecosport. Begin by inserting the tip of a flathead screwdriver into the gap between the insert…
How to Remove the Rear Door Panel of a Ford Ecosport
How to Remove the Rear Door Panel of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you can start, open the rear door of your Ford Ecosport. Begin by disengaging and removing the inserts from the door panel. Next, unscrew and …
How to Remove the Front Door Panel of the Ford Ecosport
How to Remove the Front Door Panel of the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) This guide shows you how to remove and replace the front door panel of the Ford Ecosport, subsequently replacing the handle cable. First, open the fr…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos