Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel of the Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Door trim panel

This guide shows you how to remove and replace the front door panel of the Ford Ecosport, subsequently replacing the handle cable. First, open the front door and start by removing the plastic cover of the grab handle using a thin plastic lever; then, unscrew all the fixing screws found on the sides of the door panel, detaching and removing it as shown in the video. Now, disconnect the electric connector of the window switch and the handle cable, applying the reverse procedure for reassembly!

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Insert from the Front Door Panel of a Ford Ecosport
How to Remove the Insert from the Front Door Panel of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you can start, open the front door of your Ford Ecosport. Begin by inserting the tip of a flathead screwdriver into the gap between the insert…
How to remove the door panel of the Ford Ecosport.
How to remove the door panel of the Ford Ecosport.
Ford Ecosport (2012-2023 / BK, MK 1) Today we will discover the instructions that will allow us to disassemble and remove the door panel of the Ford Ecosport. First, let's open the front…
How to Remove the Front Door Panel on a Ford Ecosport?
How to Remove the Front Door Panel on a Ford Ecosport?
Ford Ecosport (2012-2023 / BK, MK 1) In this tutorial, you will see how to remove the front door panel on a Ford Ecosport, a very simple and quick operation. First, open the door in ques…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos