Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel on a Ford Ecosport?

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Door trim panel

In this tutorial, you will see how to remove the front door panel on a Ford Ecosport, a very simple and quick operation. First, open the door in question, then unclip the central trim and, using a Torx T30 key, unscrew the two screws just exposed. Next, remove the small cap located inside the opening handle, unscrew the additional screw along with the one positioned on the lower edge, pry along the perimeter of the panel, and separate it from the door. To fit the replacement, simply follow the reverse procedure.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Insert from the Front Door Panel of a Ford Ecosport
How to Remove the Insert from the Front Door Panel of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you can start, open the front door of your Ford Ecosport. Begin by inserting the tip of a flathead screwdriver into the gap between the insert…
How to Remove the Front Door Panel of the Ford Ecosport
How to Remove the Front Door Panel of the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) This guide shows you how to remove and replace the front door panel of the Ford Ecosport, subsequently replacing the handle cable. First, open the fr…
How to remove the door panel of the Ford Ecosport.
How to remove the door panel of the Ford Ecosport.
Ford Ecosport (2012-2023 / BK, MK 1) Today we will discover the instructions that will allow us to disassemble and remove the door panel of the Ford Ecosport. First, let's open the front…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos