Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to replace the Ford Fiesta seat handle

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK V, Fiesta 5, MK 5 - Years 2002-2008
Part: Seat
Operation: How to replace the Ford Fiesta seat handle

Compare the piece before starting with the replacement operations, then remove the lever simply by lifting it and pulling it towards you, then with a pair of slotted screwdrivers you will need to insert them under the mask where the lever was housed, you will have to try to apply pressure simultaneously on both sides of the mask because in this way you can unhook the two clips that fix the mask on the seat, in this way you can remove it without problems, now with pliers pull the cable to be able to lower the seat, now then retrace the steps described in reverse for reassembly.


Posted on 3 October 2023 by ScegliAuto



Guide to replacing the Ford Fiesta seat handle cable
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) Let's see the main instructions that will allow us to disassemble and replace the handle and cable of the seat, for the reclining of the backrest, of
How do I replace the seat lever on the Ford Fiesta?
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In order to replace the Ford Fiesta front seat handle, which allows you to recline it, you will need to lift the handle located next to the headrest
Removing the seat handle on Ford Fiesta MK6
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) Let's see how to remove the handle to recline the front seat on a Ford Fiesta MK6, following these simple steps. First we open the front door and rem

    Frequently Asked Questions

    • Fiesta 2008-2017 - How do you repair the seat tilting lever of the Ford Fiesta Mk6? Read Answer
    • Fiesta 2002-2008 - How to replace seat cables on Ford Fiesta? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos