Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Piston on a Gasgas EC250

Model: Gasgas Ec 250
Part: Engine

Video tutorial

This is expert maintenance. Let's start the procedure with the cylinder already removed.

Install the shaped gaskets (under the thickest gasket). Place the clips on the piston as shown in the video.

Insert the roller cage into the conrod after lubricating it. Insert the piston with the arrow pointing towards the exhaust of the bike and secure it with the pin (also lubricate this). The circlip is an additional safety measure to secure everything.

To install the cylinder, simply place it over the piston and slide the piston inside the cylinder until it is seated.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on Gasgas EC 250F
Ec 250 In today's guide, you will find instructions to remove and replace the engine air filter on a Gasgas EC 350F enduro bike. First, remove the seat of t…
How to install the engine protection cover on the Gasgas EC 250F
How to install the engine protection cover on the Gasgas EC 250F
Ec 250 In this brief and simple guide, we will see the steps to install the engine protection cover, as well as the one on the side, of the Gasgas EC 250F e…
How to Replace the Flywheel on the Gasgas EC 250
How to Replace the Flywheel on the Gasgas EC 250
Ec 250 Below are the main steps to remove and replace the flywheel on the Gasgas EC 250 enduro bike, as well as the EC 300. First, place the bike on a stand…

How to Replace Engine Oil in the Husqvarna TE 610?

In this tutorial, you will see how to replace the engine oil in the Husqvarna TE 610, a very simple and quick operation. Before proceeding, wait for the engine to cool completely to operate safely. Start by removing the lower protection panel, then locate the drain bolt on the right side and loosen it using a 14 mm socket spanner. Once all the oil has drained from the system, remove the filter, clean it of any dirt residue, and reassemble everything. Finally, insert the required amount of oil through the upper hole.

Watch the video!


by ScegliAuto

More videos