Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the external door handle of the Geely Lc

Model: Geely Lc MK 1 - Years 2008-2016
Part: Handle

Let's find out in this short and simple guide the instructions necessary for the disassembly and replacement of the external door handle of the Geely Lc. First we open the front door and start by disassembling and removing the door panel, unscrewing all the screws located on it; after which we disconnect the handle cable. At this point we are going to unscrew the screws of the external handle, which we find inside the door; we gently remove the external handle, replacing it with the new one, applying the reverse procedure for reassembly!

Posted on 8 April 2022 by ScegliAuto

Video tutorial

Related tutorials

Position and diagram of the fuses of the Geely LC.
Position and diagram of the fuses of the Geely LC.
Geely Lc (2008-2016 / MK 1) Let's see in this short and simple guide, the location and diagram of the fuses of the Geely LC, following the instructions below. First, we get into…
How to remove the door panel in the Geely LC?
How to remove the door panel in the Geely LC?
Geely Lc (2008-2016 / MK 1) In this tutorial we can see how to remove the door panel in the Geely LC, a very simple operation. First of all, unscrew the single screw of the inte…
How to replace the rear fog light bulb on the Geely LC.
How to replace the rear fog light bulb on the Geely LC.
Geely Lc (2008-2016 / MK 1) Today, in this video tutorial, we will see how to disassemble and replace the rear fog light bulb of the Geely LC in simple and quick steps. First of…

Other guides you may be interested in

BMW E90 E91 E92 E93: Replace Front Window Regulator

Replacing the front window regulator for BMW E90, E91, E92, and E93 models follows a similar procedure for all these versions of the Anglo-German automaker's vehicles. First, obtain a flathead screwdriver to remove the inner door panel. You need to take off the cover of the armrest structure that is snap-fitted. After that, you can reconnect the wiring and screw everything back in place. Finally, reinstall the panel and insert the window glass into the structure. Having someone assist you will make the process easier.

Watch the video!


by ScegliAuto

More videos