Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box on the 2013 Geely Emgrand

Model: Geely Geely Various
Part: Fuse box

If you still haven't been able to locate the fuse box inside your Geely Emgrand 2013, don't worry because in the following mini guide you will find all the information you need. First, make sure you've turned off the car completely and parked it safely on a level surface. Then go to the driver's side and locate the small compartment in the lower left part of the dashboard. Disassemble it with your own hands and immediately behind it locate the fuse box you were looking for. Before working on them, disconnect the battery.

Posted on 2 December 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the ECU of the Geely Emgrand
How to reset the ECU of the Geely Emgrand
Geely Geely Various If the control unit (ECU) of your Geely Emgrand is giving you major operating problems then you must perform a manual reset to resolve any momentary …
How to replace the fuel filter in Geely Okavango?
How to replace the fuel filter in Geely Okavango?
Geely Geely Various In this tutorial we can see how to replace the fuel filter in Geely Okavango, very simple operation. First of all we lift the rear axle with a jack, …
How to replace the cabin filter in the Geely Emgrand EC7?
How to replace the cabin filter in the Geely Emgrand EC7?
Geely Geely Various As we can see in this tutorial, replacing the cabin filter in the Geely Emgrand EC7 is an extremely simple and inexpensive operation. First of all, l…

Other guides you may be interested in

How to Replace the Windscreen Wiper Pump on a Fiat Panda

Do you want to remove the faulty windscreen wiper pump? Let's see in this detailed video how to proceed on a Fiat Panda. Start by using a socket to remove the bolts located on the side of the headlamp and on the left wing, and finally unscrew the central grille of the Panda. Pull out the left front headlamp, grasp the wiper pump, and disconnect the water hoses and power cables. Connect the new pump to the various hoses and power cables. Before refitting everything, test the correct operation of the pump. For the assembly operations, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos