Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. Gv70
    4. : How do you remove the door panel of the Genesis GV70?

Genesis Gv70 - Video tutorial

Model: Genesis Gv70 MK 1 - Years 2020-2024
Part: Door panel
Operation: How do you remove the door panel of the Genesis GV70?

To remove the door panel of the Genesis GV70, you will need to pry at the top of the armrest to detach the trim located in that position. Under this trim, you will be able to locate the fastening screws of the panel, which will need to be loosened. After the screws have been unscrewed, you will be able to pry at the bottom of the panel to release the fastening clips. Once the panel has been completely detached, you will need to disconnect the underlying connectors and remove it completely, replacing it with a new one.


Posted on 29 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos