Do it yourself
| ||||
|
Model: Gilera Runner 50
In order to replace the variator of the Gilera Runner 50 it is necessary to loosen the screws that secure the cover of the casing located at the rear wheel. Once the casing has been removed, it will be possible to have access to the transmission: it will be necessary to loosen the nut that fixes the central pin of the variator and then extract it, removing the belt. Once the old drive has been removed, you can install a new one and place the belt around it. Finally, it will be necessary to fix the new variator with its nut and close the casing by tightening the relative bolts.
Posted on 6 March 2024 by ScegliAuto
|
How to replace the battery on the Honda X-ADV 750 2018This guide will explain the battery replacement procedure for the Honda X-ADV 750 from 2018 onwards. Here are the steps that need to be taken: 1. Move the wheel located on the handlebar on the left, towards "Seat"; 2. Lift the saddle and remove the various gaskets and plastic supports below; 3. With a plastic tool and a wrench, remove the remaining screws and pins by applying a slight pressure during the lever, without forcing particularly; 4. Unscrew the last screws of the positive and negative and the relative strap that keeps the battery tied to its seat; 5. Remove the battery to be replaced; 6. Check that the new spare battery has the same voltage and amperage to avoid electrical problems; 7. Reassemble everything by following the steps described in reverse. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |