Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. GMC
    3. :
  3. Sierra
    4. : 1988-2002 (MK 1)

GMC Sierra Years 1988-2002 (MK 1)

GMC Sierra (1988-2002 / MK 1)
How to replace the headlight on Gmc Sierra
If we intend to replace the headlight of this car, we can follow the instructions and indications given in this description and also take a look at the video. …read all…
Posted on 4 May 2023 by ScegliAuto
GMC Sierra (1988-2002 / MK 1)
How to replace the heater radiator in GMC Sierra pickup?
In this tutorial we can see how to replace the heater radiator in your GMC Sierra pickup. First of all, let's wait for the engine to be completely cold, then …read all…
Posted on 30 November 2022 by ScegliAuto
GMC Sierra (1988-2002 / MK 1)
How to replace the GMC Sierra rear light bulb?
In order to replace the GMC Sierra rear light bulb, you need to open the tailgate of the rear compartment, so that you can access the screws located next to …read all…
Posted on 15 September 2022 by ScegliAuto
GMC Sierra (1988-2002 / MK 1)
How do you remove the GMC Sierra steering wheel airbag?
In order to remove the GMC Sierra steering wheel airbag, the battery cables must be disconnected, in order to prevent the airbag from activating during the …read all…
Posted on 3 August 2022 by ScegliAuto
GMC Sierra (1988-2002 / MK 1)
How to replace the fuel pump of the Gmc Sierra
In this video tutorial we will see how to disassemble and replace the fuel pump of the Gmc Sierra, following these simple steps. First of all, let's find our …read all…
Posted on 9 April 2024 by ScegliAuto
Airbags (1) Shock absorbers (2) Car stereo (1) Battery (6) Key (3) Locking the trunk (1) V-belt (1) -board computer (9) Checks and maintenance (4) Headlight (2) Tail light (1) Fog lights (3) Air filter (3) Cabin air filter (5) Petrol filter (1) Diesel filter (1) Grille (4) Headlight bulb (7) Rear light bulb (2) License plate light (1) Handle (2) Gear oil (1) Engine oil (8) Door panel (2) Front bumper (1) Brake pads (1) Tires (1) Fuel pump (1) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (1) Wheel (2) Fuse box (6) Outside rearview mirror (3) Windscreen wipers (2) Interior blower (1)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos