Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. GMC
    3. :
  3. Sierra
    4. : Removing the GMC Sierra exterior mirror

GMC Sierra - Video tutorial

Model: GMC Sierra MK 4 - Years 2014-2018
Part: Outside rearview mirror
Operation: Removing the GMC Sierra exterior mirror

Today we will see, in this video tutorial, how to remove and replace the exterior mirror of the GMC Sierra. First we open the front door and start by removing the door panel; to do this we remove the various plastics to unscrew all the screws that we find below, and then disconnect the electrical connectors of the push-button panel, as shown in the video. Once the door panel has been removed, we can unscrew the rearview mirror screws, then disconnecting the electrical connector; remove the mirror from the outside, replacing it with the new one!


Posted on 5 April 2024 by ScegliAuto



How do i replace the exterior mirror on the GMC Sierra?
GMC Sierra (2007-2014 / MK 3) The replacement of the exterior rear-view mirror of the GMC Sierra is carried out by detaching the triangular plastic cover located in correspondence
How do i replace the exterior mirror on the GMC Sierra?
GMC Sierra (2019-2024 / MK 5) In order to replace the rear view mirror of the GMC Sierra you must first remove the door panel, loosen its fixing screws and disengage its clips. On
How to replace the exterior door handle on the front door of the GMC Sierra Mk2
GMC Sierra (1999-2007 / MK 2) The guide shows how to replace the exterior door handle of the GMC Sierra Mk2 front door. The first operation to perform is to disassemble the finish

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos