Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the exterior handle of the GMC Yukon?

Model: GMC Yukon Gmt900 - Years 2007-2014
Part: Handle

In order to replace the external handle of the GMC Yukon it is necessary to remove the corresponding door panel, unscrewing the fixing screws which are located in the seat of the internal handle and under the armrest. Once these screws have been unscrewed, it will be possible to remove the panel and access the screws that secure the handle from the inside: after loosening them, it will be possible to remove the handle from the outside of the door, so that a new piece can be inserted. replacement. After the replacement, all the components that were removed can be mounted.

Posted on 10 June 2022 by ScegliAuto

Video tutorial

Related tutorials

Removing the GMC Yukon front door panel
Removing the GMC Yukon front door panel
GMC Yukon (2007-2014 / Gmt900) Let's find out the instructions that will allow us to remove and replace the front door panel of the GMC Yukon. First we open the front door of our c…
How to replace the battery of the GMC Yukon 2021 key.
How to replace the battery of the GMC Yukon 2021 key.
GMC Yukon (2021-2026 / Gmt1yc) If the key of your 2021 GMC Yukon has stopped working and you are wondering how to replace the battery located inside it, then all you need to do is …
How to replace the battery of the GMC Yukon.
How to replace the battery of the GMC Yukon.
GMC Yukon (2015-2020 / Gmtk2uc, Gmtk2ug) In this video tutorial, we will see step-by-step instructions on how to dismantle and replace the battery of the GMC Yukon, in simple steps. First, w…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos