Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. GMC
    3. :
  3. Sierra
    4. : How to replace the front wipers on the Gmc Sierra

GMC Sierra - Video tutorial

Model: GMC Sierra MK 3 - Years 2007-2014
Part: Windscreen wipers
Operation: How to replace the front wipers on the Gmc Sierra

Today we will see, in this video tutorial, how to remove and replace the wiper blades of the Gmc Sierra, but also of the Chevrolet Silverado. First, let's move to the front of our car and start raising the wiper arm; then we go to press the button on the brush and rotate it to unhook it and remove it from the arm, as shown in the video. At this point we replace the wiper with the new one, of the right type and having the same size; we just have to hook it perfectly to the arm!


Posted on 9 September 2022 by ScegliAuto



How do you replace the radiator of the GMC Sierra?
GMC Sierra (2007-2014 / MK 3) In order to replace the GMC Sierra radiator, you have to open the hood, so that you can have access to the grille in the front of the engine compartm
How to remove the door panel of the Gmc Sierra
GMC Sierra (2014-2018 / MK 4) Let's see in this guide how to remove and replace the front door panel of the Gmc Sierra, following the instructions below. First we open the front d
What is the GMC Sierra pickup fuse scheme?
GMC Sierra (2019-2024 / MK 5) In this video we can see the position of the fuse boxes, and the relative diagrams, of the GMC Sierra MK5 pick-up, useful in case a device is malfunc

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos