Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the GMC Sierra rear light bulb?

Model: GMC Sierra MK 1 - Years 1988-2002
Part: Tail light bulb

In order to replace the GMC Sierra rear light bulb, you need to open the tailgate of the rear compartment, so that you can access the screws located next to the corresponding headlight. By unscrewing these bolts, it will be possible to remove the headlight from inside its housing by disconnecting its connectors at the rear. Once the old headlight has been removed, it will be possible to unscrew the screws of the support on which the bulbs are located, replacing them. Once the new bulbs have been inserted, you can fix the holder to the headlight, connect the latter to the connectors and fix it in its housing with the side bolts.

Posted on 15 September 2022 by ScegliAuto

Video tutorial

Related tutorials

How do I replace the GMC Sierra license plate bulb?
How do I replace the GMC Sierra license plate bulb?
GMC Sierra (2014-2018 / MK 4) In order to replace the GMC Sierra license plate light bulb, you need to access the internal components of the bumper, accessing from the bottom of t…
How to replace the GMC Sierra fog light bulb?
How to replace the GMC Sierra fog light bulb?
GMC Sierra (1999-2007 / MK 2) In order to replace the GMC Sierra fog light bulb, you need to loosen the screws that secure the headlight inside its housing, located in the rear pa…
How to replace the rear light bulbs in the GMC Sierra?
How to replace the rear light bulbs in the GMC Sierra?
GMC Sierra (1999-2007 / MK 2) Replacing the bulbs from the rear light, or the light itself, in the GMC Sierra is a very simple and fast operation, let's see how to proceed in this…

Other guides you may be interested in

Replace Timing Belt on Citroen C5

How to replace the timing belt on a Citroen C5? Lift the car on a column lift or jack (if necessary, remove the front wheel using a screwdriver to detach the right wheel arch liner). Once these steps are completed, lift the bonnet, remove the engine soundproofing panel and the belt cover (plastic or metal). Use a suitable spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket to unscrew the tensioner pulley securing bolt, then remove the water pump as shown in the video. Fit the new water pump (previously removed), the tensioner, and the belt itself, tightening everything with the socket. Finally, refit the belt pulley cover.

Watch the video!


by ScegliAuto

More videos