Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the License Plate Bulb on the GMC Sierra?

Model: GMC Sierra MK 4 - Years: 2014, 2015, 2016, 2017, 2018
Part: License plate light

See other generations:
Video tutorial

To replace the license plate light bulb on the GMC Sierra, access the internal components of the bumper from the underside of the vehicle. Here, you will find the connector attached to the bulb that needs to be disconnected.

Once the connector is removed, you can pull out the old bulb and replace it with a new replacement part: the new bulb should then be connected to the connector and inserted into its housing. After installation, check that the license plate is illuminated correctly.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to Replace the Fog Light Bulb on the GMC Sierra
How to Replace the Fog Light Bulb on the GMC Sierra
GMC Sierra (1999-2007 / MK 2) To replace the fog light bulb on the GMC Sierra, loosen the screws that secure the light in its housing, located at the back of the bumper. To access…
How to Replace the Front Fog Lights of the GMC Sierra
How to Replace the Front Fog Lights of the GMC Sierra
GMC Sierra (1999-2007 / MK 2) In today's video tutorial, see how to remove and replace the front fog light assemblies of the GMC Sierra by following the instructions below. First,…
How to Replace the Low Beam Bulbs in a GMC Sierra?
How to Replace the Low Beam Bulbs in a GMC Sierra?
GMC Sierra (1999-2007 / MK 2) In this video, you can see how to replace the low beam bulbs in a GMC Sierra. This is a very simple and quick operation; you don't need any tools. Fi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos