Do it yourself
| ||||
|
GMC Yukon - Video tutorial
Model: GMC Yukon
Gmt900
- Years 2007-2014 In this tutorial we can see how to program a new remote control in the GMC Yukon, an extremely simple and fast operation. To do this, we will necessarily need a functioning key, otherwise it will be necessary to seek assistance. First of all, we go inside the vehicle using the functioning key, then we insert it into the ignition cylinder and turn on the instrument panel. Next, we reach the programming screen using the "Info" button, press the button with the checkmark symbol and continue by holding down the lock and unlock buttons of the new remote control for 15 seconds. We then verify that the procedure has been successful.
Posted on 23 January 2024 by ScegliAuto
Other guides that may interest you |
How to reset the oil warning light on the Alfa Romeo GiuliettaIf you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.063
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |