Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the rearview mirrors of the Harley Davidson Electra Glide, you need to loosen the screws that secure the front panel of the motorcycle to its housing: these screws will be located below the front headlight and immediately below the instrument panel. Once all the screws have been loosened, you can remove the front panel and remove the old mirrors: the new ones can be inserted and secured with the appropriate screws, then reinsert the front panel of the motorcycle and check that everything works correctly.

Posted on 7 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Pads on a Harley Davidson Electra Glide
How to Replace the Brake Pads on a Harley Davidson Electra Glide
Electra Glide To replace the brake pads on a Harley Davidson Electra Glide, perform the same procedure for both the front and rear wheels. In both cases, loosen th…
How to Remove the Front Fender from a Harley Davidson Electra Glide
How to Remove the Front Fender from a Harley Davidson Electra Glide
Electra Glide Before starting, position your Harley Davidson Electra Glide vertically, and if possible, lift it to work more comfortably on the front fender. Begin…
How to Replace the Starter Motor on a Harley Davidson Electra Glide
How to Replace the Starter Motor on a Harley Davidson Electra Glide
Electra Glide Today, you will see the instructions that will allow you to remove and replace the starter motor on a Harley Davidson Electra Glide motorcycle. First…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos